Archive for September 2025Hey Dallas Drivers: How Do You Save Gas?Posted September 28, 2025 3:57 AMHigher Dallas fuel prices aren't going away any time soon. That's not good news for our wallets. A lot of Dallas drivers are trying to find ways to cut down on fuel consumption and hang on to some of their hard-earned money. We haven't mentioned the pills you can drop in your gas tank or special devices you can hook on your fuel line in order to increase fuel efficiency. There's a simple reason for that: they don't exist. There may be some truth behind some of these claims, but most of them are full-out scams. And if any of these things do actually help, it's not nearly as much as the things we've listed here. Dennis Road Automotive Stopping "Brake" Downs (Brake Pad Replacement)Posted September 21, 2025 3:59 AMIf someone tells you to put the brakes on something, you know it means stop. And stopping is one of the most important safety maneuvers you can do in any vehicle. That means your brakes have to work properly. Let's face it. You stop dozens of times every time you drive. And over time, that takes its toll on your brakes. Friction is what stops your vehicle. Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads. The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle. Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle. The pads usually are the parts that wear out first. Signs that your brakes might be getting worn are:
If you notice any of these, bring your car to us so we can have a technician inspect your brakes. Most brake pads have a wear indicator that indicates it's time they should be replaced. The technician who is checking things out will also look at your rotors for wear, as well as other brake system components. With regular inspections and maintenance, you'll be sure that when you need to stop, your vehicle will be up to the task. Dennis Road Automotive Stopping "Brake" Downs (Brake Pad Replacement)Posted September 21, 2025 3:59 AMIf someone tells you to put the brakes on something, you know it means stop. And stopping is one of the most important safety maneuvers you can do in any vehicle. That means your brakes have to work properly. Let's face it. You stop dozens of times every time you drive. And over time, that takes its toll on your brakes. Friction is what stops your vehicle. Most newer vehicles have disc brakes, and the parts that wear out the fastest are those that rub against each other every time you stop, the rotors and the pads. The rotors are discs that rotate with the wheels, and the pads are removable surfaces that make contact with the rotors to slow or stop your vehicle. Bits of both wear off each time you stop, and when enough of either (or both) lose too much material, your brakes become unable to safely slow or stop your vehicle. The pads usually are the parts that wear out first. Signs that your brakes might be getting worn are:
If you notice any of these, bring your car to us so we can have a technician inspect your brakes. Most brake pads have a wear indicator that indicates it's time they should be replaced. The technician who is checking things out will also look at your rotors for wear, as well as other brake system components. With regular inspections and maintenance, you'll be sure that when you need to stop, your vehicle will be up to the task. Dennis Road Automotive Give me a Brake (Light)!Posted September 14, 2025 3:57 AMIf that little brake warning light pops up on your dash, do you know what it means? Well, if you said no, you wouldn't be alone. You know it has something to do with your brakes, but exactly what? You're not sure. One of the reasons is that it could mean a lot of different things. It could be something simple, like you put your parking brake on and forgot to take it off. Easy fix, you're on the road in seconds. Or, it could mean there's something wrong with your anti-lock brake system. That is a pretty complex symphony of speed sensors, computers and wiring, and sometimes things get a little out of whack. You could have a defective sensor or some wiring may have gotten damaged or come loose. A trained technician at Dennis Road Automotive with special equipment can sort it all out. It's also possible you have low brake fluid. That could be caused by a number of things. One simple reason is that your brake pads have worn down. Replacing them could solve the problem. Another possibility is that you have a leak in your brake system. That could be serious. If your brake fluid level gets really low, your stopping power goes down along with it, and a vehicle that can't stop is a safety hazard to you and others on the road. Of all the warning lights on your instrument panel, pay attention to the brake warning light. If it comes on, come on over to Dennis Road Automotive very, very soon. A vehicle is great when it's moving. But if it can't stop, well, that is a disaster waiting to happen. We’d love to hear from you. Let us know if you have any questions. Dennis Road Automotive A Clean Sweep (Fuel Injector Cleaning)Posted September 7, 2025 4:08 AMYour vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite. It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine. But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to. They can also shoot contaminants into the engine. One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to. If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance. When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system. A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance. An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease. Dennis Road Automotive | ||
SearchArchiveDecember 2024 (17)January 2025 (4) February 2025 (4) March 2025 (5) April 2025 (4) May 2025 (4) June 2025 (5) July 2025 (4) August 2025 (5) September 2025 (4) October 2025 (4) | CategoriesAlternator (1)Timing Belt (2)Maintenance (1)Brake Service (3)Water Pump (1)Headlamps (1)Alignment (2)TPMS (2)Oil Change (3)Spark Plugs (1)Transmission (1)Fuel Economy (2)Safe Driving (1)Drive Train (1)Tires and Wheels (1)Cooling System (1)What Customers Should Know (12)Air Conditioning (1)Fluids (3)Brakes (6)Battery (3)Windshield Wipers (1)Tires (2)Trip Inspection (1)Safety (1)Inspection (1)Exhaust (1)Fuel System (2)Differential Service (1)Steering (1)Cabin Air Filter (1) | |
What our clients are saying about us
We have established longterm and stable partnerships with various clients thanks to our excellence in solving their automotive needs!
Dennis Road Automotive, the best customer service!
I'll never go anyplace else for my car! Honest, highly competent, and quick! The only place to take your car in Dallas!











